'TPO-Free' UV Lash Glue: A Sourcing Brief for Lash Brands
What the TPO ban means for anyone sourcing or private-labeling UV/LED lash adhesive — and how to vet a "clean"-labeled product before it carries your name. Written as a brief: skim the bullets and tables.
The EU prohibited TPO — the main UV/LED photoinitiator — as a CMR 1B substance from 1 September 2025, triggering a wave of "TPO-free" claims. "TPO-free" certifies the absence of one banned substance, not product safety: the replacements (TPO-L, BAPO, TMO) are the same acylphosphine-oxide family, currently unclassified rather than cleared. Because they share TPO's core, routine screening can even return the TPO signature. Verify any adhesive by its INCI declaration, SDS, named photoinitiator and testing — not a front-of-pack claim.
The situation
- TPO is banned in the EU. Reclassified as a CMR 1B substance under CLP and prohibited in all cosmetics placed on the EU market from 1 September 2025, with no sell-through of existing stock.
- Not restricted in the US or UK — yet. The FDA has not banned TPO; the UK is widely expected to follow the EU but has not. EU-facing lines must reformulate now; US/UK lines have runway.
- The knock-on effect: a wave of "TPO-free" claims across UV/LED lash (and nail) adhesives — which is exactly where the sourcing risk begins.
What "TPO-free" certifies — and what it doesn't
- It certifies the absence of one specific, now-banned photoinitiator.
- It does not certify safety. UV curing still needs a photoinitiator, so TPO is replaced — typically by TPO-L, BAPO, or TMO, all the same acylphosphine-oxide family.
- The gap: those replacements are "not classified" rather than cleared, with little published eye-area data. "Not classified" is an unfinished assessment, not a clearance.
- The parallel: it's the same empty framing as "formaldehyde-free" on cyanoacrylate — a claim with no measured value. (See formaldehyde-free vs low-formaldehyde lash glue.)
Evaluate the data, not the label
Whatever chemistry you source — UV/LED or moisture-cured — MAGAL's position is the same: require measured, third-party numbers and a named photoinitiator. We make lash adhesives, including UV/LED systems, and back them with disclosure; our cyanoacrylate line, for example, is tested at 0.0279% formaldehyde (72.5% lower than a common benchmark), no detectable NMP, a passed clinical patch test, and lot-level documentation. Request our test pack and a 7-day sample set.
Request test data & samples →The four photoinitiators, side by side
Structurally these are near-identical: TPO-L is the liquid ester of TPO (CAS 84434-11-7); TMO (CAS 270586-78-2) is TPO plus methyl groups; BAPO (CAS 162881-26-7) carries two acyl groups. Their regulatory standing differs — their chemistry barely does.
| Photoinitiator | EU regulatory status | Your action |
|---|---|---|
| TPO | Classified CMR 1B; banned in EU cosmetics from 1 Sept 2025 (UK proposed 2026–27; not banned in the US) | Non-compliant for the EU — reformulate out now |
| TPO-L | Not classified as CMR; not currently banned | Permitted now, but unverified — demand data; expect possible future classification |
| BAPO (Omnirad/Irgacure 819) | Not banned; cosmetic-grade use described as requiring regulatory review | Usable with caution — confirm status, hold safety data |
| TMO | No harmonized CMR classification; not on the EU SVHC list (as of 2025) | Newer, thinner independent data — treat as unproven; disclose it |
Your verification protocol
Before a "clean"-labeled adhesive carries your brand, confirm each of these:
Supplier due-diligence checklist
- Named photoinitiator and concentration — what replaced the removed substance?
- Finished-product testing — third-party and clinical patch-test data, not assurances.
- Measured numbers, not "free-from" claims (formaldehyde content, solvent screen).
- SDS and a lot-level Certificate of Analysis as standard.
- Sample equals bulk — made the same way as production.
And account for how analysis behaves: because the replacements share TPO's reactive core, a routine screen can return the TPO signature regardless of the label. A "TPO-free" claim is therefore only meaningful against the INCI declaration, the SDS and a targeted assay — never the front of the pack.
| What you're evaluating | What it actually tells you |
|---|---|
| "TPO-free" claim on the pack | Marketing statement — not verification on its own |
| INCI naming Trimethylbenzoyl Diphenylphosphine Oxide, diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide, "Lucirin TPO," or CAS 75980-60-8 | TPO is present — EU non-compliant since 1 Sept 2025, at any level |
| Routine lab screen of a TPO-L product | May report the TPO signature — shared reactive core; can't resolve the analogue |
| Full INCI declaration + SDS + targeted assay (reference standards) | Confirms the actual substance and compliance status |
What manufacturer disclosure should look like
MAGAL makes lash adhesives — both cyanoacrylate and UV/LED systems — and backs them with disclosure rather than slogans. Here is the level of documentation to expect from any serious supplier (shown here for our cyanoacrylate line):
| Attribute | MAGAL cyanoacrylate (example) |
|---|---|
| Formaldehyde (measured) | 0.0279% — 72.5% lower than a common industry benchmark |
| NMP (reproductive-toxic solvent) | Not detected (NMP-free) |
| Skin tolerance | Hypoallergenic; passed clinical patch test (Ellead, 33 subjects, no adverse reactions) |
| Facility & process | FDA-listed, cleanroom, automated production line (lot-to-lot consistency) |
| Documentation | Lot-level CoA, English SDS, MoCRA support; USPTO patent; Taiwan Innotech Bronze Medal |
| Performance & terms | 0.5–2s cure · 5–7 week retention · MOQ 1,000 mixable · 7-day samples |
Put your name on a glue you can document
MAGAL makes lash adhesives — cyanoacrylate and UV/LED — in a Daegu, South Korea, FDA-listed facility on an automated line, and discloses what's in them: measured numbers, clinical patch testing, SDS, and lot CoA. Ask us exactly what's in the adhesive you're sourcing, and request a 7-day sample set with the documentation.
Request samples →Frequently asked questions
Does the EU TPO ban apply in the US?
No. The EU prohibited TPO in cosmetics from 1 September 2025 after classifying it as a CMR 1B substance. The US FDA has not banned TPO, and the UK has not either, though a future ban is widely expected. EU-facing lines must comply now; US and UK sellers have time but should plan ahead.
Is 'TPO-free' a safety certification?
No. It certifies the absence of one banned photoinitiator. The usual replacements, TPO-L, BAPO and TMO, are not currently classified as CMR or banned — but 'not classified' indicates an unfinished assessment rather than a clearance, and all share TPO's acylphosphine-oxide chemistry with limited eye-area data.
Can a product labelled 'TPO-free' still contain TPO?
It shouldn't, but the label is only a claim. TPO appears under several names (INCI 'Trimethylbenzoyl Diphenylphosphine Oxide,' diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide, 'Lucirin TPO,' CAS 75980-60-8), and loosely or non-compliantly labelled products have been found still containing it. Because the replacements share TPO's core, a routine screen can also return the TPO signature, so verify by the full INCI list, the SDS, or a targeted assay.
What documentation should we require from a supplier?
Measured test numbers (not 'free-from' claims), a clinical patch test on the finished product, an SDS, and a lot-level Certificate of Analysis — plus confirmation that the sample is made the same way as bulk production, and the specific photoinitiator named.
What does MAGAL offer buyers?
MAGAL makes lash adhesives — cyanoacrylate and UV/LED — and backs them with full disclosure: measured test numbers, a clinical patch test, lot-level CoA and English SDS, an FDA-listed automated facility, MOQ 1,000 mixable, and 7-day stock samples. For example, our cyanoacrylate adhesive is tested at 0.0279% formaldehyde (72.5% lower than a common benchmark) with no detectable NMP.